Second story windows can be difficult to safely get down from without extra tools, like a ladder. Because of this, these windows should be avoided. [1] X Trustworthy Source US Occupational Safety and Health Administration U. S. government agency responsible for setting and enforcing workplace safety standards Go to source If you plan to leave through a window, your best choice may be one that’s ground level and roughly chest height.
When the magnetic bond between the fixed and movable parts of the sensor is broken, the alarm will be activated. Magnet sensors are almost always placed on the frame of the door or window at the top, bottom, or one of the sides. [2] X Research source Some magnetic sensors cannot be bypassed because they are placed inside the door jamb and the door.
For more sophisticated magnet sensors, you may need to use tools, like a screwdriver, to remove the movable part of the sensor on the door or window. Then, place it onto the stationary sensor to make it think the window is still closed. Before you remove any parts of the sensor, you might first want to take a picture of it with your cell phone. This way, you’ll have a reference photo if you have to put it back together later. You may be able to check whether or not your fridge magnet works by applying it to the sensor and running a check on your security system, if that feature is available. If the sensor reads as closed when the fridge magnet is in place and the window open, this technique should work.
If you removed the movable part of the sensor because your system was more sophisticated, all you have to do is refasten that part into place. If you have difficulty remembering how to reinstall the mechanism, consult the picture you took earlier.
Falling from a second story window or higher could cause serious injury or death. For this reason, you should avoid windows this high. [5] X Trustworthy Source US Occupational Safety and Health Administration U. S. government agency responsible for setting and enforcing workplace safety standards Go to source
In many cases, the button will be in the center of its casing and positioned in such a way that when fully closed, the door or the window fully presses it. Some button sensors may have a casing that contours itself so that the sides of the casing form a cradle for the door or window. The button for the alarm is often located in the center of this cradle.
Open the door or window in extremely tiny increments. Once the button is accessible, but still engaged, use a popsicle stick to hold the button down and keep the alarm from sounding. Use stiff card stock for sensitive alarms. Even opening your door or window a tiny amount might cause sensitive alarms to sound. Use a thin piece of stiff material, like card stock, and wiggle it between the space between the button and the door or window to hold the button in place.
Many doors and windows are painted. Be careful when applying tape to these surfaces. Sometimes the tape can damage the paint job when you pull it free. For more permanent disabling measures, you may want to glue your button blocker in place. However, doing so will make this point more accessible to burglars as well.
Some cameras will be oriented at a single important point, like a corner, door, or entrance of a walkway. These may only narrowly focus on that point. Others may focus on a wide/long view, like down a hallway or even the side of a building. In many cases, there will be other items in the environment, like boxes, chairs, tables, and so on. You might be able to creep behind these to hide from the camera. If you set up a home security system, make it visible. Nowadays, cameras are relatively cheap. They are even wireless. You can plug them in. You can get a package of Costco and put them up very quickly.
It may help to draw potential routes past the camera on a piece of paper to evaluate your options. Make a simple drawing of the environment, shade the likely area of the camera’s vision, and draw lines to represent possible unseen paths you can use. Some cameras may have be equipped with wide angle lenses to give a broader view. To account for this, you should make the suspected field of vision for the camera slightly larger than you originally think.
Before sneaking, you may want to imagine the view from the camera’s perspective as a final check to see if you’ve overlooked something. When sneaking behind objects, like desks and chairs, try to stay as close to the item as possible. This will cut down the angle of visibility of overhead cameras. If sneaking behind objects, like desks and chairs, mind that gaps don’t give you away and make yourself as small as possible to prevent a limb or piece of clothing from getting caught on camera.
