At any time during this process, pressing “Set/Recall” again closes the time set menu and saves all your changes up until that point. If you’ve made all the changes you wanted to make, then press “Set/Recall” to save them without scrolling through the whole menu.
The + button is located on the front of the watch directly below the watch face, and the - button is located on the bottom right side of the watch. On some Timex models, the + button reads “Start/Split” and the – button reads “Stop/Reset. ”[3] X Research source This feature is useful for checking the time in another part of the world quickly. If you do business or have to make a phone call to different time zones, it’s handy to stay organized.
If you only wanted to set the time and leave the date alone, press Set/Recall after this step to save your progress and close the menu.
The advantage of 24-hour time is that you don’t have to check if the time is AM or PM. It’s easier to tell what part of the day it is with a quick glance.
If the time or date looks wrong, you may have set them incorrectly. Press Set/Reset again to open the time menu back up and check your settings.
To set multiple alarms, keep pressing Mode to find ALM2 and ALM3. Select each one with Stop/Reset.
If your watch is set to 24-hour time, you don’t have to select AM or PM.
If you only want the alarm to ring on one day, disable it after it rings.
A small clock icon appears on the left of your watch display to let you know that an alarm is active.
To reactivate the alarm, do the same actions and hit Start/Split to toggle the alarm back on.
If you scroll too far and miss Chrono mode, keep pressing Mode to cycle through the watch options. The watch modes are Clock, Chrono, Timer, and Alarm. Cycle back to Chrono if you miss it the first time.
If you’re trying to improve your lap time, set the Lap to appear larger. This way, you can see how your laps are measuring up. If you’re just timing your run without tracking laps, then displaying Split larger is more useful. The watch keeps the format that you picked for every time you use the Chrono unless you change it again.
You can use this feature for any measurement. Whether you’re tracking your time per lap, mile, kilometer, or another distance, the Chrono will measure it when you hit Start/Split. Repeat this for as many laps as you’re running to get the time for each lap.
Be careful not to accidentally hit Stop/Reset again to start the timer. This will erase your current workout and you’ll have to start over.
When on a specific workout, you can view each lap of your run plus the total time. To clear a workout, hold Stop/Reset for 5 seconds. When the watch beeps, the last stored workout is deleted. Continue holding the button to erase all workouts and free up all the watch memory.
