3 Ways To Program A Dish Network Remote

If you have a 20. 0, 20. 1, 21. 0, or 21. 1 style remote, you’ll need to use the next method instead. You can find your remote’s style number in the manual.

This will depend on your remote’s specific model number.

TV — Press the Volume Up button and look for an increase in volume. Anything else — Press the Power button and look at the product to see if it turns on or off.

If you have a 40. 0, 50. 0, 52. 0, or 54. 0 style remote, you’ll need to use the previous method instead. You can find your remote’s style number in the manual.

Again, you can find this number in your remote’s manual.

Some products may have 10 or more possible codes. If so, try to use one that has the highest “Success Count” rating (it should be the top code in the list) first.

TV — Press and hold the TV button at the top of the remote. Anything else — Press and hold either the AUX button (all products) or the DVD button (DVD players and VCRs).

If programming your remote for a VCR or DVD player, enter a 1 before you enter the three-digit code. If programming for any other non-TV product, enter a 2 before you enter the three-digit code. If you held down the AUX button while attempting to connect your remote with your TV, you’ll enter a 0 before the three-digit code.

If you don’t see the three flashes, you’ll have to try using a different three-digit code. If you run out of three-digit codes, try scanning for the code.

TV — Press and hold the TV button at the top of the remote. Anything else — Press and hold either the AUX button (all products) or the DVD button (DVD players and VCRs).

Each press of the arrow will test another code.