Make sure you find the right kind for your printer. Do not use inkjet transparencies in a laser printer. The transparency will melt inside the printer and damage the printer. [2] X Expert Source Luigi OppidoComputer & Tech Specialist Expert Interview. 30 September 2021.
All you need to do is take the cleaning sheet out of its protective sleeve. Run it through the printer using your printer’s feed button or the software. You shouldn’t try to print anything on it. You can save the sheet for later.
In addition, be sure to print on the rough side of the transparency. If you’re not sure how to load your paper so it prints on the rough side, make a mark on a regular sheet of paper and note how you put it in your printer. Print on the page to see how you need to load the transparency so it prints on the correct side. [3] X Research source
If your printer doesn’t have a transparency setting, use the glossy paper setting.
All you need to do to print is click “File” and “Print. " Once under “Print,” you can change some settings. However, you may need to go into “Printing Preferences” to change some settings.
After printing, do not immediately touch the transparency, this is done in order to prevent smudges from the ink. [7] X Expert Source Luigi OppidoComputer & Tech Specialist Expert Interview. 30 September 2021.
To save to a jump drive, insert the jump drive into a USB port on your computer. Find the drive under “This PC. " Go the “File” menu in the document. When you save the file, save it to the jump drive folder. To save to the cloud, just save it to the folder on your computer for the cloud service you use. Make sure you’re connected to the internet so it uploads to the cloud.
