Never paint a fridge or clean it with liquids while it’s plugged into an electrical outlet. It could electrocute you. Have a friend help you if the refrigerator is too heavy to move by yourself. Empty the food in the refrigerator and the freezer into a cooler or backup fridge. Otherwise, since the refrigerator will be unplugged, the food will go bad.

If you’re spraying inside, like in a workshop or the kitchen, open all of the windows and turn on the fans to help air out the room. Wearing a mask will also prevent you from inhaling all of the fumes. You’ll likely need a friend or family member to help you relocate the fridge. Use a dolly to wheel it to wherever you’re going to spray it.

You can buy drop cloths at a paint store or a hardware store. If you don’t have a drop cloth, lay out a tarp, trash bags, or an old sheet instead. Be careful trying to lift the fridge. Ask someone to help you, or lift one corner at a time by yourself and slide the drop cloth underneath.

Let the fridge air dry. Don’t brush it with a towel because that could leave lint behind, which makes the paint look bumpy. Use an air compressor to dust any nooks and crannies, like the crack between the door and the fridge. This will also remove food particles. A mixture of 1 part white vinegar and 1 part water will work if you don’t have soap or want a natural alternative.

If your fridge is already painted, you don’t need to take off all of the paint. You only need to sand off the glossy finish. You can wipe the refrigerator down with a damp cloth after sanding if there’s a lot of dust buildup.

Use a spoon or your fingernail to smooth down the tape as securely as possible. You can also remove the handles or hinges with a screwdriver or wrench if you don’t want to risk getting paint on them. Set them somewhere safe where you won’t lose them.

You can also use a two-in-one paint and primer in the colour of your choice. Not only does it save you from having to prime the fridge separately, but it also tends to be a thicker paint. That helps avoid splatters and drips, as well as provides more coverage. [9] X Research source {“smallUrl”:“https://www. wikihow. com/images/thumb/d/de/Paint-a-Refrigerator-Step-7. jpg/v4-460px-Paint-a-Refrigerator-Step-7. jpg”,“bigUrl”:"/images/thumb/d/de/Paint-a-Refrigerator-Step-7. jpg/aid1117658-v4-728px-Paint-a-Refrigerator-Step-7. jpg",“smallWidth”:460,“smallHeight”:345,“bigWidth”:728,“bigHeight”:546,“licensing”:"<div class="mw-parser-output">

License: <a target="_blank" rel="nofollow noreferrer noopener" class="external text" href="https://creativecommons. org/licenses/by-nc-sa/3. 0/">Creative Commons</a>
\n</p>

<br />\n</p></div>"} Apply 1 to 2 coats of primer with a foam roller, letting each coat dry for 4 to 6 hours.

If you don’t stir the paint, it will be runny and cause drips in your coats.

Saturate the roller completely by rolling it in the paint tray. This helps the paint go on smoothly without streaks. It should take each coat about 4 to 6 hours before you can paint the next one. If you don’t let the paint dry completely before applying the next coat, you’ll just smear and ruin the previous coat. Don’t forget to paint the top of the fridge! It’s best to start with the top so you don’t smudge the sides while trying to reach it.

A small watercolour brush will work if you don’t have an angled brush.

Check the instructions on the paint can if you aren’t sure how long to let it dry. Clean up any mistakes, like paint that got somewhere it wasn’t supposed to, with a cloth or Q-tip dipped in rubbing alcohol. Scrub the area to remove the paint. [14] X Research source Roll on a layer of polycrylic sealant after your paint is dry if you want extra protection. Use a foam roller to apply 1 coat of the sealant, then let it dry for 72 hours. [15] X Research source

An oil-based primer will help prevent rust, too. Shake the primer can for 1 minute before you start spraying.

Leaving the primer to dry overnight will ensure it’s totally dry before you start painting.

For example, if your colour scheme is navy, baby blue, and cream, paint the top half baby blue and the bottom half navy. Neutrals like white, black, gray, or chrome are always good options for a subtler effect. Avoid eggshell or matte finishes that show fingerprints and smudges.

Shake the paint can for at least 1 minute before you start spraying to thicken it up. If you notice any drips once a coat has dried, use a piece of fine, 150 to 220 grit sandpaper to lightly sand it off. Spray paint should dry enough in 1 to 2 hours for you to apply a new coat. Wear latex gloves while spraying if you want to avoid staining your hands with the paint.

Paint takes longer to dry in high humidity or cool temperatures. If you want to prolong the life of your paint, you can spray a protective sealant over it once the paint is dry. Apply 1 coat of sealant and let it dry for at least 72 hours. [21] X Research source A spray enamel sealant will prevent the refrigerator from rusting.