Your veil should drape without showing any skin at the sides of your face. [1] X Expert Source Margo WestProfessional Tailor Expert Interview. 7 December 2020.

Your veil may look a lot wider than it is long at this point, but that is alright. Use a rotary cutter to cut your tulle—not hand scissors. That will help eliminate the chance that the edges will appear choppy. [2] X Expert Source Margo WestProfessional Tailor Expert Interview. 7 December 2020. If you’re making a blusher veil, cut it in a circle. [3] X Expert Source Margo WestProfessional Tailor Expert Interview. 7 December 2020. v

If you are sewing ribbon onto the edge, sew it an inch or two (2. 54 to 5. 08 centimeters) away from the edge first, then trim off the excess tulle. If you’re planning to add trim, use a tulle that has a stiffer feel to it. [4] X Expert Source Margo WestProfessional Tailor Expert Interview. 7 December 2020.

For a full veil, sew all the way across the top, straight edge. For a less-full veil, sew across the center part, leaving a gap on either side.

If you used a sewing machine, pull on the bobbin threads.

Some people like to wrap ribbon or extra around the comb first.

If the tulle is too long, you can cut it down at this point.

Make sure that the arc is going towards the bottom-right corner (the one with all the folds). This way, when you unfold the fabric, you’ll get a rounded rectangle.

Double-check the length again. If the veil is too long, cut it shorter, and adjust the layers as needed. Your veil may look much wider than it is long at this point. Don’t worry, this is how it’s supposed to be! The next few steps will fix this.

For a full veil, sew all the way across the edge. For a less-full veil, sew across the center part, leaving a gap to either side.

If you used a sewing machine, tug on the bobbin threads.

Some people like to wrap ribbon around the comb first.

Alternatively, you can hand-sew a beaded trim instead.

A birdcage veil is different from the traditional, long, fluffy wedding veil. It is made from stiffer lace that goes across your face, like a birdcage. is great for vintage-themed weddings.

You can always cut your veil longer than 9 inches (22. 86 centimeters), especially if you want it to go past your chin. Try to cut straight across the connecting “dots” between the diamonds. This will give you a cleaner, neater finish. [10] X Research source

Again, try to cut through the connecting dots between the diamonds.

Use clear thread or a thread color that matches your netting. Sew through the last row of diamonds. This way, you won’t get a scrunchy hem.

Adjust the gathers so that they fall between the knots at each end of your sewing. This will give you a neater finish.

You can also use a ribbon color that contrasts your netting color. A black-and-white combo is both elegant and classic.