Consider the size of your record collection when determining your layout. The arrangement will look best if all the rows have the same number of records.
Screw hooks typically come in both silver and gold finishes. Consider matching the hooks to other metallic accents in your room, like the door handles or light fixtures.
You can also use a long strip of painters’ tape to mark the line instead of a pencil, if you don’t want to write on the wall. Make sure you use a spirit level with this method, too, to ensure that the tape isn’t crooked.
For each record, you will position two screws along the bottom. The other screws are positioned one on each side, about halfway up the record jacket to keep it from tipping off the wall.
The two side screws should end up being 12. 5 inches (32 cm) apart horizontally. There are no top screws in this arrangement, which makes it easy to slip your record in and out.
The left bottom screw for one record should always be 4 inches (10 cm) from the right bottom screw for another.
The screw should stick out about 1 inch (2. 5 cm) from the wall The “L” part of the bottom screw hooks should point up. The side screws should point inwards towards the record.
Slide the records in gently—it’s never a good idea to put additional pressure on the screw hooks, which can be ripped out of the wall.
The screws should line up vertically with the screws in the row below.
Frames may be a better option for displaying a small number of records, since they are typically more expensive than other display options.
You could display either a record sleeve or the actual LP in one of these square frames. If you plan to display the record itself, don’t use one that you plan to play again, since it will almost certainly get scratched by the frame.
These are also a more economical option.
The display will look best if all the rows have the same number of records.
Double check that the tape you’ve chosen is strong enough to support the weight of the frame. Most mounting tapes include their weight limit on the packaging. This is a great option if you’re renting and don’t want to leave permanent marks on the walls.
Certain frames, such as those featuring top and bottom rails, may come with drywall mounting screws. Position the frame in place using a level, then use a screwdriver to screw it into the drywall.
This display option will scratch up the records, so make sure you’re using records that you don’t plan to play. If you’ve selected records with brightly colored labels, consider laying them out in a rainbow pattern. Or, arrange them so the colors are distributed evenly. If you have enough records, consider lining them up edge to edge so they cover the entire wall—or even the ceiling. [11] X Research source
If you want to make sure that your records are hung straight across, use a spirit level to draw a straight horizontal line. Then, align the bottom edge of your records with this line.
Repeat with the rest of your records until you’ve completed your layout. You can also use thumbtacks and stick one through the middle of the LP to attach it to the wall. This will leave a hole in your wall, however. [14] X Research source
