Wear protective eyewear and gloves while you’re operating the circular saw. If you’re trying to cut a perfectly straight line, lay a framing square on the sheet metal and press it against the flat base on the circular saw. As you’re cutting, keep the base of the saw pressed against the edge of the framing square so the line you cut is straight. [5] X Research source You can also use a slide attachment to help keep your cuts straight.
Don’t worry about clamping the tile down on the saw table.
Make sure you’re wearing protective eyewear while you’re operating the wet saw.
If any edges of the tiles are going to be exposed, use a deburring tool to file them down so they’re not sharp. [16] X Research source
