The exact method you use to remove the screen will depend on the type of window screen you have. Many window screens will have small tabs that are pulled out, releasing the screen from the window frame. Make sure you carefully remove the screen as many window screens can be ripped or torn easily.
Start at the top of the screen and work your way down, covering the entire screen with water. Flip the screen over to make sure you’ve sprayed both sides.
Any of these cleaning solutions will work to clean your window screens. If they only need a light cleaning, dish soap will get the job done just fine. Ammonia can be toxic, so keep it off of your skin and make sure you mix your solution outside. Wear a dust mask if you’re especially sensitive to the smell. [6] X Trustworthy Source Centers for Disease Control and Prevention Main public health institute for the US, run by the Dept. of Health and Human Services Go to source
Try to use small, circular scrubbing motions. Scrub the screen gently. Being too forceful can tear the screen. Rinse the brush off while you are a cleaning to avoid reapplying dirt to the screen. You can use a toothbrush if you don’t have a soft bristle brush on hand. [8] X Research source
Do not use a high pressure or high power setting on the hose. Make sure you have sprayed the entire screen down by rinsing both sides.
You can wipe the screen dry with a cloth if you’re in a huge rush, but it can be hard to fully dry mesh screens by hand.
If you’re happy with the way your screen looks once it has air dried, feel free to skip the vacuuming. It will make a big difference on those softer mesh screens, though!
It’s best to work top to bottom when you’re dusting the screen.
Mix some mild soap and warm water in a bucket. Dip a small sponge or washcloth into the bucket. Use the sponge or washcloth to gently wash the stained area. If you have to scrub the area, do so gently. Using too much force can easily tear the screen. Finish by drying the spot off with a towel.
