Be careful not to rub the stiff bristles on the wood to harshly, as this may damage the wood. This method is most effective on unfinished wood that is already in good condition.
This method is especially effective for areas that are harder to reach with other cleaning techniques.
Be sure to avoid rubbing the wood too harshly as this could cause damage. Once the erasing compound turns grey in color, it is no longer effective and you should reapply.
Because this is a type of liquid treatment, you must be very careful and apply the mineral spirits sparingly to avoid damaging the wood.
For best results, use a gentle flicking motion with the bristles of the brush on the surface of the wood. A soft brush will also prevent damage to the wood because it employs a gentle touch. Additionally, you can use a microfiber mop or broom.
Make sure the microfiber cloth is clean ahead of time. You can wash it in the sink with soap and water (and then let it fully air dry) or you can wash it in the washing machine and toss it in the dryer before use.
This means that you should dust or sweep your unfinished wood often (at least once a week), as well as wiping it down with a microfiber cloth a couple of times each month.
Using a wet cleaning method can also cause the wood to become harder to finish later, if that is part of your eventual plan for the unfinished wood.
Try to choose a piece that is on the backside of the wood or otherwise less visible for your testing. Additionally, choosing several small pieces to test ahead of time will also help ensure that your chosen cleaning method will result in an overall consistent surface for the finished product.
Use cation when brushing the surface of the wood or using the vacuum on the wood. Being too rough can cause visible and lasting imperfections.
