Flushing your machine with hot water after each use will remove any residual solution which can harden in the spray lines. Once the carpet has dried, vacuum once more to clear out dry debris like fuzz. [3] X Expert Source Ashley MatuskaProfessional Cleaner Expert Interview. 15 April 2019. Always clean the machine before putting it in storage. [4] X Research source

If your model has more than one tank, remove and clean them both. [7] X Research source

Turn the locking keys to remove the floor nozzle.

If you’re unsure how to remove the brush roll, consult with your individual model’s manual. Brush rollers can also be removed in some of the models like Bissell ProHeat 2X Revolution to clean the brushes in a better way, all you need is to remove the brush roll cover. [11] X Research source

Removing any debris from the suction diverter prevents clogs from forming.

The tank will need to be emptied and rinsed when it reaches the maximum fill line. However, for the best results, empty, rinse and dry all tanks before storing. [16] X Research source If your model has a SpotBot automated feature, clean the brushing area and window with a soft cloth or microfiber towel. [17] X Expert Source Ashley MatuskaProfessional Cleaner Expert Interview. 15 April 2019. It’s safe to leave water and solution in the clean tank unless you used Oxy Boost, in which case the tank will need be emptied and rinsed.

Don’t twist the cleaning tool; it should pull straight off after you push the lock button.

Remove the tank by opening the hose door and lifting the collection tank straight up by the handle. Take off the top lid.

Remove the mode selector by turning it, then pulling it towards you. Remove the water filtration tower through the top tank.

Check the pre-motor filter by opening the top lid and pulling the tab. Make sure the “T” parts are lined up under their respective grooves when replacing the filter. Check the filter at the back of the machine beneath the cord wrap. Press the latch to pull the door down. Open the door straight out and downwards. Remove the filter with two hands. Make sure the filter door is properly shut after replacing the filter.