You can find a table for measuring water volume in a well here: http://www. geotechenv. com/Reference_Pages/water_measure_tables. pdf. For example, if the depth of the water in your well is 20 feet (6. 1 m) and the diameter is 6 inches (15 cm), then your well holds 1. 469 gallons (5. 56 L) of water for each foot. Multiply the volume of water you found by the number of feet in your well to get 29. 38 gallons (111. 2 L) total. If you can’t find the volume of the well yourself, then you need to call a well specialist to determine it for you.
Don’t work on your well while the pump is still on since the bleach treatment won’t be as effective. You cannot use the water in your home while the well pump is off.
The bleach may irritate your skin so wear protective cleaning gloves to protect you. It’s okay if you can’t get your well perfectly clean since you will be flushing it out later on.
For example, if you found that your well has 50 gallons (190 L) of water, then you would need to add 1 1⁄2 US pints (0. 71 L) of bleach to the well.
You can use your standard garden hose for rinsing off your well. Just be sure to run clean water through the hose before you water any plants so you don’t kill them.
Don’t drink or use any of the water coming through your faucets since they contain bleach and could be harmful to drink.
Have bottles or pitchers of water prepared ahead of time so you can still drink while your well and pipes are disinfecting.
It’s normal for the water to be discolored when you first turn on your water after treating it since the bleach can break apart slime or gunk trapped inside the pipes. Don’t let more than 100 gallons (380 L) of chlorinated water run into a septic system or drain into a natural body of water. [9] X Trustworthy Source University of Georgia Cooperative Extension Division of the University of Georgia focused on research and community education Go to source
Check your well water annually to see if any new contaminants have gotten into it. If you’ve recently had any repairs or maintenance done on your well, test the water to make sure you didn’t introduce any contamination. You may also be able to get home water tests from online water treatment specialists.
If you don’t feel comfortable installing a whole-home water filter yourself, contact a plumber or a filter specialist to install it for you. Some whole-home filters mount on the wall while others are a standalone unit. Pick the type of filter system that fits best in the space.
You may need to cut pipes or alter the plumbing under your sink to attach the new filtered faucet. When you want filtered water, use the new faucet attached to the filter rather than the main one. If you don’t have any holes left in your sink’s fixture, then you cannot install the under-sink filter.
Countertop filters only filter the water on the fixture they’re attached to.
Standard aerators require a tank and an air compressor that needs power, but it doesn’t limit the flow of your water. Some aerators feed water through a narrow valve into the tank and don’t require power to operate, but it may restrict the water flow in your home.
While your water is turned off, you won’t be able to use any of the faucets in your home.
You can buy a water softener from hardware stores or water treatment specialists. Tighten any connections you made with a wrench to help prevent any leaks in your system.
If you have a salt-free water softener, then you don’t have to connect it to a brine tank. Water runs between the brine tank and the main softener to help circulate and store soft water.
