This is the highest quality connection for audio and video and is typically found only on modern DVD players.
When you turn on your TV, you can select “Input List” to see all your input connections. You can change the name of the HDMI connection with your DVD player so you can later click “Steve’s DVD Player” instead of “HDMI 2. "
You’ll need to press the “Input” button on your remote until you get to the HDMI channel that your DVD is plugged into. If you don’t see or hear the input from your DVD correctly, something could be wrong with your cable or cable’s connections.
LG also calls these “composite input. “[3] X Research source
You’ll need to press the “Input” button on your remote until you get to the A/V channel that your DVD is plugged into. If you’re having an issue with the video quality, something might be wrong with your yellow cable. Check to make sure that cable isn’t damaged or incorrectly plugged in. If you’re having an issue with the audio, something might be wrong with your red or white cables. Check to make sure that those cables aren’t damaged or incorrectly plugged in.
A component cable has two red plugs, which can make things confusing. To figure out which is which, lay the cable out flat so that all of the prongs line up. The order of colors should be green, blue, red (video), white, red (audio).
You’ll need to press the “Input” button on your remote until you get to the Component channel that your DVD is plugged into. If you mixed up the red cables, you’ll notice a visual and audio issue here and can switch them.
